- Elderly dog ​​joint care mattress28BYJ-48-16 16:1 Stepper Gearmotor

Title Default Title
Qty:

Description

  • 28BYJ-48-16 16:1 Stepper Gearmotor
  • Offers a 5 V unipolar geared stepper motor
  • Designed for the control of HVAC vanes
  • Provides lower torque or higher speed 16:1
  • Features a 5mm "Double-D" shaft
  • Nominal voltage: 5 V

The 28BYJ-48-16 16:1 Stepper Gearmotor is designed for control of HVAC vanes and similar low-demand equipment, these stepper-motor gearboxes have lots of hacking potential. This is the lower torque / higher speed 16:1.

This 28BYJ-48 is a 5V unipolar geared stepper motor. It features a 5 mm "Double-D" shaft, mounting lugs, and a nice 5-conductor 0.1 inch pitch connector. The gearing isn’t the beefiest or most precise, but it’s adequate for reasonable loads.

  • 1x 28BYJ-48-16 16:1 Stepper Gearmotor

Size

  • Diameter: 28 mm
  • Height (excluding shaft): 20 mm
  • Double-D Shaft Diameter: 5 mm | Double-D shaft length: 9 mm
  • Cable length: 23 cm / 9 inch
  • Gearing: 16:1 (16.032:1)
  • Torque at 5V: FULL Step mode: 147 gmf.cm (2.04 in.oz) at 260 mA draw | HALF Step mode: 197 gmf.cm (2.73 in.oz) at 204 mA draw
  • Steps per revolution: 513
  • Nominal voltage: 5 V
  • Current: 0.26 A
  • Coil resistance: ~35 ohms
  • No-load pull in frequency: > 600 Hz
  • No-load pull out frequency: > 1000 Hz
  • Weight: 37 g