- Elderly dog ​​joint care mattressEZO-PMP Pump Kit

Title Default Title
Qty:

Description

  • Ezo-Pump kit from Atlas Scientific
  • Includes a peristaltic pump with controller, a pump tube & connector, a power supply, etc.
  • Also comes with a data cable and a 10ml graduated cylinder
  • Can be used to dispense liquids with a +/-1% accuracy
  • Supplied Tubing: 61cm
  • Tubing Data Protocol: UART & I2C

The EZO-PMP Pump Kit is a small peristaltic dosing pump and serial controller with all the parts needed to set up a nice home lab environment. The EZO-PMP inside each kit is a small, intelligently designed peristaltic pump that can be used to dispense liquids with a +/-1% accuracy (with calibration). With four modes of operation — continuous and volumetric dispensing, constant flow rate and dose over time — this embedded dosing pump kit is perfect for repeatable and reliable measurements.

The pump can simply connect to any TTL UART (such as an FTDI USB bridge or an Arduino RX/TX line) or I2C device. It is equipped with an easy-to-read RGB LED with multiple color codes to help define any situation the EZO-PMP is in. Each EXO-PMP runs at 3.3V–-5V for logic and 12V–24V for the motor and has plenty of example code for multiple formats to get you up and running in no time!

  • 1x Peristaltic Pump with Controller
  • 2x 1-inch Long Pump Tube
  • 2x Inline Tubing Connector
  • 1x 12V Power Supply
  • 1x Power Supply Connector
  • 1x Data Cable
  • 1x 10ml Graduated Cylinder (for calibration)

PDF Files

  • Flow Rate: 0.5ml to 105ml/mins
  • Accuracy: +/- 1%
  • Modes of Operation: Continuous Dispensing, Volume Dispensing, Constant Flow Rate, Dose Over Time
  • Calibration: Single Point
  • Supplied Tubing: 61cm
  • Tubing Size: Any 5mm O.D. Tubing
  • Data Protocol: UART & I2C
  • Default I2C Address: 103 (0x67)
  • Operating Voltage: 3.3V–5V (Logic), 12V–24V (Motor)
  • Pump Head: 2m
  • Data Format: ASCII