- Cat anti-jump window safety netWetLink Penetrator Blank (No Hole) M10

Title Default Title
Qty:

Description

  • WetLink Penetrator Blank (No Hole) M10
  • Includes a bulkhead, O-ring, and nut
  • Hex key: 6 mm
  • Features a hex socket for ease of installation
  • Used to seal any unused holes on your watertight enclosure
  • Bulkhead Material: 7075-T6 Aluminum

The WetLink Penetrator Blank (No Hole) M10 is used to seal any unused holes on your watertight enclosure with a high-pressure seal. Each set includes a bulkhead, O-ring, and nut. It’s rated to 950 meters (3,116 feet) of water depth. This blank features a hex socket for ease of installation.

  • 1x WLP Bulkhead (Blank)
  • 1x WLP Nut
  • 1x O-Ring

Size

  • Maximum Rated Depth (seawater): 950 m / 3116 ft
  • Bulkhead Thread Size: M10
  • Bulkhead Thread Pitch: 1.5 mm
  • Bulkhead/Nut Wrench Flats: 16 mm
  • Hex Key: 6 mm
  • O-ring Size: -013 Buna-N 70A
  • Overall Assembled Height from Endcap: 8 mm / 0.315 in
  • Overall Thread Length: 20 mm / 0.788
  • Overall Outer Diameter: 18 mm / 0.709 in
  • Recommended Through Hole Size: 10.2 mm
  • Design Lifetime: 3 years or 500 cycles to-rated depth
  • Temperature Rating (air)²: -25 to 60 °C / -13 to 140 °F
  • Temperature Rating (water)²: -4 to 40 °C / 32 to 104 °F
  • Recommended Bulkhead Wrench: WL-M10-BULKHEAD-WRENCH
  • Bulkhead Material: 7075-T6 Aluminum
  • Recommended Installation Torque (bulkhead or nut): 3.5 Nm
  • In Air Weight (no nut): 6.6 g
  • In Water Weight (no nut): 4.2 g